Service
Crack Filling in North Jersey
Untreated cracks let water reach the base layer and turn into potholes. We rout, clean, and fill cracks with hot-pour rubberized sealant rated for commercial traffic — the single highest-ROI maintenance step you can take.
Overview
Every crack in your lot is a funnel for water — and in New Jersey, water means freeze-thaw damage, base failure, and potholes by spring. Crack filling is the single most cost-effective preventive maintenance step you can take, often returning $5–10 of saved repair cost for every $1 spent.
We use hot-pour rubberized crack sealant rated for commercial traffic, applied with melt kettles at 380°F. The result is a flexible, watertight seal that moves with the asphalt through temperature swings instead of cracking back open.
What's included
- Hot-pour rubberized crack sealant
- Wire-wheel cleaning for proper bond
- Routing on wider, structural cracks
- Prep work prior to any sealcoat application
- Extends pavement life 3–5 years
Why it matters
Prevents Potholes
Sealing cracks before water gets to the base layer eliminates 80% of pothole formation.
Highest ROI Maintenance
A few hundred dollars in crack filling can prevent thousands in asphalt patching and base repair.
Required Before Sealcoating
Sealcoat won't bridge open cracks. Crack fill first, then seal — the only correct sequence.
Fast & Minimally Disruptive
Most cracks are filled and trafficable within 30 minutes — perfect for active commercial properties.
Our process
- 1
Crack Assessment
We walk the lot and mark every crack ¼ inch or wider. Hairline cracks are noted for sealcoat coverage.
- 2
Routing (Structural Cracks)
Wider cracks are routed to a uniform reservoir for maximum sealant volume and bond.
- 3
Cleaning
Wire-wheel and high-pressure air clean dust, vegetation, and old sealant out of the crack.
- 4
Hot-Pour Application
Rubberized sealant melted to 380°F is poured flush with the surface for a flexible, watertight seal.
- 5
Cool & Re-Open
Sealant cools in 20–30 minutes and the lot is back open to traffic.
Frequently asked
How long does crack fill last?+
Properly applied hot-pour rubber lasts 3–5 years before re-application is needed, and longer when paired with sealcoat.
Should we crack fill or just sealcoat?+
Both. Crack filling addresses structural openings, sealcoating protects the surface. They work together.
What size cracks do you fill?+
Anything ¼ inch wide or larger. Hairline cracks under ¼ inch are typically covered during sealcoating.
Service area
We provide crack filling services across all of North Jersey, including:
Ready to bring your lot back to life?
Get a free, no-obligation quote within 1–2 business days.